Double-sided release adhesive CEMEDINE BBX100
Features
- The adhesive has superior water resistance, which corresponds to IPX8.
- Because it is liquid, the adhesive can be used for thin and uneven substrates and can be used for design alterations.
- The adhesive can be used just after being applied. Moreover, because the adhesive secures rework time, it is possible to rework in a plant.
Dispensing / Repair process
Water resistance
Process comparison
| |
Liquid / moisture curing |
Molding |
Molding |
Liquid / UV curing |
Liquid / moisture curing |
| BBX100 |
Double sided tape |
Standard gasket |
CIPG |
FIPG |
| Repairability |
Excellent |
Good |
Excellent |
Good *2 |
Bad |
| Waterproof |
Excellent |
Good *1 |
Good |
Excellent |
Excellent |
| Impact resistance |
Excellent |
Good |
Excellent |
Excellent |
Excellent |
| Design freedom |
Excellent |
Bad |
Bad |
Excellent |
Excellent |
| Workability |
Excellent |
Good |
Bad |
Bad |
Excellent |
| Process time |
Excellent |
Bad |
Bad |
Excellent |
Excellent |
| Cost |
Excellent |
Bad |
Bad |
Bad |
Excellent |
*1 Difficult when it is thin
*2 One side repair
Property
| |
BBX100 |
| Application / Properties / Features |
Repairable seal material |
| Type |
One-part moisture curable elastic adhesive |
| Base |
Acrylic modified silicone resin |
| External appearance |
Black paste |
| Viscosity |
Pa･s/23°C |
300 |
| Specific gravity |
g/cm3 |
1.18 |
| Skin over time |
23°C |
35 min |
| Curing properties |
Hardness |
Shore A |
35 |
| Breaking strength |
MPa |
0.29 |
| Elongation at break |
% |
200 |
| Capacity standards |
330mL |
Appearance: Confirmation by seeing
Viscosity: BS-type rotational viscometer (Rotor No.7, 10 rpm)
SVI: Viscosity ratio between 10 rpm and 1 rpm
Density: Based on the specific gravity cup method in JIS K6833 6.1.1
Dumbbell test: Dumbbell No.3 ( thickness : 1.2 mm)
