Castrol Perfecto X 32, 46, 68
Castrol Perfecto X 32 is a turbine oil based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.
Description
Castrol Perfecto X 32 is a turbine oil based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures. Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common supply.
Additional Product Information
SKU: 157ADFAvailable Pack Sizes: 208L, BULK
Range: Premium Turbine Lubricant
Base Oil: Mineral
Kinematic Viscosity @ 40°C (cSt): 32
Application
Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common supply.
Castrol Perfecto X grades possess superior air release performance, good resistance to foaming and excellent water separation properties.
The Castrol Perfecto X range is fully compatible with nitrile, silicone and fluoropolymer seal materials.
The Castrol Perfecto X grades meet the requirements of, or are approved against, the following specifications:
- British Standard BS 489
- DIN 51515 -1 and -2
- GEK 32568g and GEK 107395A (ISO 32)
- Alstom HTDG 90 117 (formerly ABB)
- Siemens TLV 9013 04 and 05
Technical Data
|
Name
|
Method
|
Units
|
Perfecto X
32
|
Perfecto X
46
|
Perfecto X
68
|
| Density @ 15°C, Relative |
ASTM D4052 |
g/ml |
0.849 |
0.860 |
0.865 |
| Viscosity, Kinematic 40°C |
IP 71 |
mm²/s |
32 |
46 |
68 |
| Viscosity, Kinematic 100°C |
IP 71 |
mm²/s |
5.7 |
7.1 |
9.5 |
| Viscosity Index |
IP 226 |
None |
112 |
112 |
112 |
| Foam Sequence I, Tendency |
IP 146 |
ml |
10 |
10 |
10 |
| Foam Sequence I, Stability |
IP 146 |
ml |
0 |
0 |
0 |
| Air Release Mins to 0.2%v @
50°C
|
IP 313
|
minutes
|
2
|
2
|
3
|
| Demulsification (IP 19) |
IP 19 |
seconds |
60 |
60 |
90 |
| Pour Point |
IP 15 |
°C |
-15 |
-15 |
-12 |
| Flash Point, COC |
ASTM D92 |
°C |
222 |
234 |
234 |
| Acid Number, Total
(Potentiometric)
|
ASTM D664
|
mg KOH/
g
|
0.05
|
0.05
|
0.05
|
| Rust Test (24 hrs Synthetic
Sea Water)
|
IISO 7210/ASTM D665B |
|
Pass
|
Pass
|
Pass
|
| RPVOT |
ASTM D2272 |
minutes |
1200 |
1200 |
1200 |
| Copper Corrosion, 3hrs @
100°C
|
IP 154/ISO 2160/ ASTM D130 |
|
1A
|
1A
|
1A
|
| TOST Test, hrs to 2 mg KOH/g |
ASTM D943-95 |
hours |
>10000 |
>10000 |
>10000 |
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.
