Product Description

Castrol Perfecto X 32, 46, 68

Castrol Perfecto X 32 is a turbine oil based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

 

Description

Castrol Perfecto X 32 is a turbine oil based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures. Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common supply.

Additional Product Information

SKU: 157ADFAvailable Pack Sizes: 208L, BULK
Range: Premium Turbine Lubricant
Base Oil: Mineral
Kinematic Viscosity @ 40°C (cSt): 32

 

Application

Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common supply.

Castrol Perfecto X grades possess superior air release performance, good resistance to foaming and excellent water separation properties.

The Castrol Perfecto X range is fully compatible with nitrile, silicone and fluoropolymer seal materials.

The Castrol Perfecto X grades meet the requirements of, or are approved against, the following specifications:

• British Standard BS 489
• DIN 51515 -1 and -2
• GEK 32568g and GEK 107395A (ISO 32)
• Alstom HTDG 90 117 (formerly ABB)
• Siemens TLV 9013 04 and 05

Technical Data

Name	Method	Units	Perfecto X   32	Perfecto X   46	Perfecto X   68
Density @ 15°C, Relative	ASTM D4052	g/ml	0.849	0.860	0.865
Viscosity, Kinematic 40°C	IP 71	mm²/s	32	46	68
Viscosity, Kinematic 100°C	IP 71	mm²/s	5.7	7.1	9.5
Viscosity Index	IP 226	None	112	112	112
Foam Sequence I, Tendency	IP 146	ml	10	10	10
Foam Sequence I, Stability	IP 146	ml	0	0	0
Air Release Mins to 0.2%v @   50°C	IP 313	minutes	2	2	3
Demulsification (IP 19)	IP 19	seconds	60	60	90
Pour Point	IP 15	°C	-15	-15	-12
Flash Point, COC	ASTM D92	°C	222	234	234
Acid Number, Total   (Potentiometric)	ASTM D664	mg KOH/   g	0.05	0.05	0.05
Rust Test (24 hrs Synthetic   Sea Water)	IISO 7210/ASTM D665B		Pass	Pass	Pass
RPVOT	ASTM D2272	minutes	1200	1200	1200
Copper Corrosion, 3hrs @   100°C	IP 154/ISO 2160/ ASTM D130		1A	1A	1A
TOST Test, hrs to 2 mg KOH/g	ASTM D943-95	hours	>10000	>10000	>10000

The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.

Price Terms︰ FOB Shenzhen,Hongkong

Payment Terms︰ TT/PAYPAL

Product Image